Home > Service Area > Iowa > Cedar Rapids
Commercial Concrete Leveling in Cedar Rapids,
In Cedar Rapids, IA, summers are hot with a mix of drought-like conditions and torrential rainstorms, and winters that are freezing and snowy. Due to temperature and moisture variations, the concrete in this area may start to settle and become uneven over time. Voids form underneath the concrete, which then allows the concrete to sink into these voids.
Other factors that can cause concrete deterioration include:
- Freezing and thawing
- Chemical exposure
- Mechanical abrasion
If you have damaged or cracking concrete, a thorough inspection by our experts is important. We can determine the best solution for industrial concrete floor repair.
Polyjacking Commercial Properties in Cedar Rapids
If you need industrial concrete leveling repair in the Cedar Rapids, Iowa area, we recommend polyjacking. All concrete leveling options can fill voids that have formed under the concrete slab and position the slab back in place. However, we have found that polyjacking is the most effective and long-lasting of all the methods.
With polyjacking, high-density polyurethane is used to lift the slabs back to its desired height. It is an effective concrete leveling method that not only lifts the surface, but it also prevents settlement from recurring. Polyurethane foam is 75% more economical and 80% faster to complete than other methods. It cures in less than 15 minutes, allowing same day use. Because polyjacking requires fewer and smaller holes, the repairs are hardly noticeable.
The Polyjacking Process for Settling Concrete
Before starting the polyjacking process, we determine where the voids are located underneath the concrete using a GPR (Ground Penetrating Radar) system. A GPR also allows us to accurately locate pipes, conduit, tension cables, and more.
After locating voids, we drill 5/8" holes into the affected area. Polyurethane foam is injected into the holes, allowing the foam to fill voids and gaps. The foam is so lightweight, it actually contours to the size and shape of the void, then raises the concrete back to its original position.
If you need more information about polyjacking in the Cedar Rapids, IA area,
contact Polyjacking.com. We'll be happy to assist you!