Street Leveling Around Kansas City

The sinking and settlement of streets is a problem that every municipality has to deal with. The expansion joints beneath the concrete break down over time and water is allowed to penetrate below the street. This water will flow through the soil beneath the street, eroding the soil and creating voids beneath the street. These voids will cause the street to sink and settle into the gaps. As traffic flows onto the street, it creates an unsafe environment for pedestrians and vehicles.

Street leveling in Kansas City and St. Louis by Polyjacking.comIt is important to get streets back to their original level and make the street safe for traffic. Removal and replacement of the affected area of the street is a time-consuming, disruptive, and costly project. If you notice your street is unlevel and in need of repair, let give you a free inspection and get the repair done with little disruption. Our cost-effective method will get the repair done, and your street will be ready to use immediately after the repair is completed.

Street Leveling Solutions for the St. Louis Area uses polyjacking to level and stabilize the concrete in the streets. The method of polyjacking is relatively simple with the right materials and poly equipment.

  1. A small 5/8" hole is drilled into the affected areas of the street.
  2. High-density polyurethane foam is injected into the holes to fill the voids beneath the street.
  3. The polyurethane foam cures in a short amount of time filling the voids beneath the concrete slab.
  4. As the foam expands, the concrete is precisely leveled and stabilized. There is very little disruption.
  5. The holes are filled and the site cleaned up. 

Other advantages of using polyurethane foam for highway leveling are:

  • Street leveling in Kansas City and St. Louis by Economical: High-density polyurethane provides a permanent solution that is 75% cheaper than the cost of removing and replacing existing concrete.
  • Non-Invasive: Because this method is 80% faster than mudjacking, there is very little disruption.
  • Efficient: The polyurethane hardens in minutes and the street can be used immediately after the repair is done.
  • Lightweight: Polyurethane foam is lightweight, only adding 3-5 pounds per cubic foot.
  • Moisture Resistant: This material is also resistant to moisture making this method long-lasting.

Using polyjacking to repair streets in Kansas City and St. Louis, MO and the surrounding area, city, and state agencies can correct the problem quickly, with little inconvenience to the public. It can often be done without having to completely shut down the street to the public. It is important to maintain and keep the street up to their highest safety standards. That is why using the polyjacking method will keep the street level and strengthen the soil beneath the highway. This prevents future erosion of the soil beneath the street and keeps the street from sinking in the future.

If there is a need for street leveling in the St. Louis,  Kansas City, MO or the surrounding area, don't hesitate to contact

Free online quote

service area

service area map polyjacking